Store-bought drain cleaners dissolve soap and light grease. They do nothing for root intrusion, grease buildup 40 feet in, or a collapsed pipe segment. Masters Plumbing Service's Drain Cleaning team in Murray arrives with professional-grade augers and hydro-jetting units that actually resolve the blockage.
π Call +1-855-718-1500 β Book Today
Every drain call we run in Murray, UT starts with identifying what type of blockage you're dealing with β because the method that clears a grease blockage efficiently is different from the one that handles root intrusion.
Our truck-mounted hydro-jetting units propel water at up to 4,000 PSI through a rotating nozzle that scours pipe walls clean β removing grease buildup, scale, and soft root intrusions in a single pass. Unlike augers, jetting leaves the pipe interior clean rather than just piercing a hole through the clog.
A camera inspection saves you money by showing us exactly what we're dealing with. It also protects you from paying to clear a blockage that's actually hiding a structural pipe failure that will recur immediately.
Whether it's a backed-up bathroom sink or a full house sewer drain stoppage, our team carries the right nozzle sizes and cable diameters for the specific pipe we're clearing.
Our written service report notes the blockage type, location, method used, and any structural observations from the camera run. You walk away knowing the state of your drain system, not just that the water is flowing again.
From a slow bathroom sink to a full main-line stoppage affecting every fixture in the house, our drain techs in Murray, UT have the equipment and training to clear it.
Grease blockages in kitchen drain lines often occur 10β40 feet from the drain opening, past the p-trap, where the line cools and FOG solidifies. Our jetting equipment reaches and clears these deposits where a plunger or retail product cannot.
Hair and soap scum are the most common bathroom drain blockages. They bond to the pipe walls inside the p-trap and in the drain arm, forming a mat that progressively constricts flow. Our techs remove the drain cover, clear the p-trap obstruction with a hand snake or drum auger, and flush the line.
Root intrusion at pipe joints is the leading cause of main sewer blockages in homes over 20 years old. Our electric root cutter attachment on the sectional cable removes the root mass; we then scope again to confirm the line is clear before pulling equipment.
Floor drain traps can dry out and allow sewer gas into the structure if the drain isn't used regularly. We clear blockages, re-water the trap, and can install a trap primer if the drain is prone to drying in Murray's climate.
Restaurants, multi-family buildings, and homes with chronic grease or root problems benefit from scheduled hydro-jet maintenance on a 12β24 month cycle. We map the drain system, document baseline camera footage, jet the lines, and re-scope to confirm clean pipe walls. This approach prevents emergency backups rather than reacting to them.
Sometimes the question isn't just "why is this draining slowly" but "what is the actual condition of this pipe system." We run a recorded CCTV inspection with distance markings and provide a written report noting blockage types, root intrusion points, joint offsets, pipe material, and any visible structural defects.
We don't show up and start snaking blind. Our approach uses a camera-first diagnostic protocol to confirm what we're clearing before selecting the method.
Tell our dispatcher which fixtures are affected β one slow drain vs. multiple backed-up fixtures tells us whether we're likely dealing with a localized clog or a main line blockage. We schedule same-day when slots are available.
Before clearing anything, we run a CCTV camera into the line to see blockage type, location, and pipe condition. This prevents treating a structural pipe failure with a jetting pass that won't hold.
Based on the camera findings, we present you with a flat-rate quote and explain exactly which method we're using β electric auger, hydro-jet, root cutter β and why. No work begins until you approve.
If anything was found during the camera run that warrants monitoring or repair, it's noted in the written report so you have a record β useful for planning future maintenance or a repair conversation.

My kitchen drain had been running slow for months and completely stopped the night before Thanksgiving. Masters Plumbing Service had a tech out same morning, ran the camera, and found a 15-foot grease accumulation in the drain arm behind the wall. The jetter cleared it in about 20 minutes. The footage before and after was dramatic β I could actually see the pipe walls go from coated to clean. No recurrence four months later.
Main line backed up completely on a Sunday. Found Masters Plumbing Service and they came within 2 hours. Camera found a 3-inch grease plug combined with roots at a joint. Cleared both with cable and jetter, sent me the scope video via email. Super transparent process.
We own a rental property and schedule annual hydro-jet maintenance with Masters Plumbing Service. The jetting intervals have gotten the drain-related tenant calls down to nearly zero. The camera documentation each year also gives us a clear record of pipe condition over time.

Masters Plumbing Service provides professional Drain Cleaning across Murray and the surrounding Murray, UT service area. Same-day service is available on most calls β call to check today's availability.

Masters Plumbing Service's certified drain team is in Murray today. Call now to check same-day availability.
π Call +1-855-718-1500 Now